Burra Sheetmetal Korumburra Security Cages
In August 2026, Hyline supplied and installed bolt-down galvanised chain mesh security cages around existing gas assets at Burra Sheetmetal in Korumburra. The project was undertaken to address the client’s WorkSafe compliance requirements.
The cages use 1800mm high 50 × 3.15mm knuckle-barb galvanised chain mesh, three Waratah barbed wires and one 4mm galvanised helicoil cable. Base-plated posts and top and bottom rails are used throughout.
Access was provided through two pairs of gates, one large swing gate fitted with a support wheel and one standard pedestrian gate.
Project Snapshot
- Client
- Burra Sheetmetal
- Location
- Korumburra VIC
- Project Date
- August 2026
- Job Type
- Chain mesh security cages
- Scope
- Supply and install bolt-down security cages around existing gas assets to address the client’s WorkSafe compliance requirements
- System
- 1800mm high 50 × 3.15mm knuckle-barb (KB) galvanised chain mesh, with 3 × Waratah barbed wires and 1 × 4mm galvanised helicoil cable, using base-plated posts and top and bottom rails throughout
- Gates
- Two pairs of gates, one large swing gate with a support wheel and one standard pedestrian gate
- Manufacturing
- Gates manufactured by Hyline, avoiding delays waiting for external gate manufacturers
Our own gate manufacturing keeps projects moving
Smaller galvanised fencing projects benefit from Hyline’s ability to manufacture its own gates. By coordinating gate fabrication and installation directly, the team avoids delays waiting for outside manufacturers and helps keep turnaround times short.